Differences

This shows you the differences between two versions of the page.

--- important [2023/08/04 11:25] – [Room Access Rules] Dotsika, A. (Ada, Student B-EE)
+++ important [2024/12/03 10:01] (current) – Berkhout, J.T. (Julian, Student B-EE)
@@ Line 53: / Line 53: @@
 ===== Safety Rules =====
 ==== Soldering Station ====
-  - Soldering station does not require an introduction workshop, but you must follow the [[Important|General Lab Rules]].
+  - Soldering stations do not require an introduction workshop, but you must follow the [[Important|General Lab Rules]].
   - You must provide a Safety Form to be granted access.
   - You are allowed to borrow the spare soldering machines, but you must ask permission from the lab assistants.
@@ Line 66: / Line 66: @@
   - You must provide a Safety Form to be granted access.
   - When removing your print fron the machine make sure to clean any residue on the platform.
-  - If issues occur with the machine, please inform the lab assistant, do not try to fix the printer on your own.
+  - If any issues occurs with the machine, please inform the lab assistant, do not try to fix the printer on your own.
-  - If you want to use your own filaments there is specific slots (slot 3 to 5), retrieve your filament after your print, otherwise anyone is allowed to use it.
+  - If you want to use your own filaments there are specific slots available (slots 4 to 5). Retrieve your filament after your print, otherwise anyone is allowed to use it.
-  - The first two slots of filament are reserved for the filament provided by the lab.
+  - The first three slots of filament are reserved for the filament provided by the lab.
-  - Only researchers and technicians are allowed to use the filaments provided by the lab but you need to request it when booking. Add a description note in your booking specifying which filament you want to use.
+  - For Small prints you are allowed to use the filament provided by the lab. For larger prints you must provide your own.
   - The 3D printer has a dedicated bin, please use it to dispose of residue filament or any type of material related to the 3D printer.
-  - Use the computer to access the 3D printer the USB slot is blocked.
+  - Use the computer to access the 3D printer and submit printing jobs. The USB slot is blocked.
-  - When using the metal filament make sure that you use the dedicated metal tips.
-  - Before printing ensure that the tip that you are using is the correct one, if the metal tip is installed, please remove it and use the corresponding tip for your print.
-===== Protocol =====