Differences

This shows you the differences between two versions of the page.

--- important [2023/07/31 14:53] – Dotsika, A. (Ada, Student B-EE)
+++ important [2024/12/03 10:01] (current) – Berkhout, J.T. (Julian, Student B-EE)
@@ Line 31: / Line 31: @@
 \\
 \\
-  - Ordered List Item Before using a machine make sure to read their respective Safety Rules.
+  - Access to the lab is only allowed to users who have received a Lab Introduction by the lab assistants and signed the Safety Form
+  - Equipment in the lab can only be reserved and used after receiving the respective introduction from the lab assistants.
   - No eating or drinking (Only PET bottles with caps are allowed, no mugs, no beakers).
   - If you need a portable device (soldering, VNA, MokuPro, etc.), please ask permission from the lab supervisor or lab assistants.
@@ Line 37: / Line 38: @@
   - Defective / missing equipment should be reported to the lab assistant (email <sil-ee@utwente.nl>).
   - Do not remove the computer peripherals (Monitor, mouse, keyboard etc.).
-  - Keep doors always close (some equipment are sensitive to outside vibrations).
+  - Lab doors must be kept closed at all times.
   - Be mindful of people working in the lab and do not disturb others with music or loud conversations.
   - Keep the workspace clean after using it (deidcated trash for each machine are placed at your disposal).
-  - Do not let people in the lab if they do not have access.
-===== Room Access Rules =====
+===== Room Access and Equipment Booking Rules =====
   - You are not allowed to book a machine for other people.
-  - If you are a Bachelor/Master's student, your access will be given only for the module period.
+  - If you are a Bachelor/Master's student, your access will be given only for the module period. Exceptions are possible for students working on their Master thesis.
-  - Exception to the rule 2 for Master Thesis or Student Teams.
+  - Access to the booking scheduler for each equipment will be given after you have received the respective-indruction.
-  - Access will be given if you have passed the instruction for the machine.
+  - A Safety Form signed by user (and supervisor in case of students) is required to grant access (for all stations). The signed Safety Form has to be handed to the Lab Assistants or Administration before the user can access the lab.
-  - Exception to rule 4 for the soldering station.
+  - All equipment, except of the soldering station, require booking through  [[https://calendar.eemcs.utwente.nl/sil-ee/Web/index.php?redirect=|Booking]]
-  - Safety Form is required to grant access (for all stations).
-  - All equipment, except of the soldering station, require a booking through  [[https://calendar.eemcs.utwente.nl/sil-ee/Web/index.php?redirect=|Booking]]
   - Booking in advance is not required, you can book and request access, but you will have to wait for the confirmation of your request
 ===== Safety Rules =====
 ==== Soldering Station ====
-  - Soldering station does not require an introduction workshop, but you must follow the [[Important|General Lab Rules]].
+  - Soldering stations do not require an introduction workshop, but you must follow the [[Important|General Lab Rules]].
   - You must provide a Safety Form to be granted access.
   - You are allowed to borrow the spare soldering machines, but you must ask permission from the lab assistants.
@@ Line 68: / Line 66: @@
   - You must provide a Safety Form to be granted access.
   - When removing your print fron the machine make sure to clean any residue on the platform.
-  - If issues occur with the machine, please inform the lab assistant, do not try to fix the printer on your own.
+  - If any issues occurs with the machine, please inform the lab assistant, do not try to fix the printer on your own.
-  - If you want to use your own filaments there is specific slots (slot 3 to 5), retrieve your filament after your print, otherwise anyone is allowed to use it.
+  - If you want to use your own filaments there are specific slots available (slots 4 to 5). Retrieve your filament after your print, otherwise anyone is allowed to use it.
-  - The first two slots of filament are reserved for the filament provided by the lab.
+  - The first three slots of filament are reserved for the filament provided by the lab.
-  - Only researchers and technicians are allowed to use the filaments provided by the lab but you need to request it when booking. Add a description note in your booking specifying which filament you want to use.
+  - For Small prints you are allowed to use the filament provided by the lab. For larger prints you must provide your own.
   - The 3D printer has a dedicated bin, please use it to dispose of residue filament or any type of material related to the 3D printer.
-  - Use the computer to access the 3D printer the USB slot is blocked.
+  - Use the computer to access the 3D printer and submit printing jobs. The USB slot is blocked.
-  - When using the metal filament make sure that you use the dedicated metal tips.
-  - Before printing ensure that the tip that you are using is the correct one, if the metal tip is installed, please remove it and use the corresponding tip for your print.
-===== Protocol =====