====== Getting Started ======

**This page is a starting point for anyone making use of the SIL for the first time.**

===== What should I do if I want to work in the lab for the first time? =====

**If this is your first time using the lab, please follow the procedures below.**

==== Soldering Station ====
There are a few steps needed to be able to work in the lab.
  - Read the [[important|Safety Rules]].
  - Fill in the Safety Form (you can find the safety form in [[important|Safety Form]] and how to fill it in [[wiki|How to fill the Safety Form]]).
  - Send the Safety Form to <sil-ee@utwente.nl>.
  - Request Access to the lab through Sesam (more details on how to do this can be found in [[wiki|Room Access Request]]).
  - Wait for the Approval Email.
  - Use the lab.

==== Other Equipment ====

There are a few steps needed to be able to work in the lab.
  - Decide which equipment you would like to use.
  - Read the [[important|Safety Rules]].
  - Fill in the Safety Form (you can find the safety form in [[important|Safety Form]] and how to fill it in [[wiki|How to fill the Safety Form]]).
  - Request an introduction workshop by emailing <sil-ee@utwente.nl>.
  - Go through the Introduction.
  - Send the Safety Form to the email <sil-ee@utwente.nl>.
  - Create an account at the booking system [[https://calendar.eemcs.utwente.nl/sil-ee/Web/index.php?redirect=|Here]] (the lab assistants will grant you access to the equipment you have passed the instruction for).
  - Book a time slot to use the machine.
  - Request Access to the lab through Sesam (more details on how to do this can be found in [[wiki|Room Access Request]]).
  - Wait for the Approval Email.
  - Use the lab during the booked timeslot.

===== Reccurent Access =====

**Once the Introduction steps are completed, the access to the lab can be done with the steps below.
**
==== Soldering Station ====
  - If soldering station available: Use the lab.

==== Other Equipment ====
  - Book a time slot to use the machine.
  - Use the lab during the booked timeslot.

===== How to fill the Safety Form =====

The Safety Form needs to be filled in by all users of the lab. There is two versions of the Safety Form, one for the Researchers/Technicians or PhD students and a student version for Bachelor/Master's students. Bellow you can find a quick guide on how to fill in the Safety Form.

==== Research Version ====

===== Room Access Request (Sesam) =====
[[https://www.utwente.nl/en/service-portal/campus/campus-security-service/building-access-authorisation-during-and-outside-office-hours#process-and-manual-requesting-building-access | Sesam Access]]

===== Equipment =====

This part provides the list of equipment that can be found in each lab-room. More details for each machine can be found either on their respective pages or checking their linked manuals below.

==== C2531 ====
  * [[3D Printer]]: UltiMaker S5 Pro
  * [[Laser Cutter]]: Trotec Speedy 300
  * [[PCB Maker]]: Botfactory
  * [[Multi-instrument signal processing unit]]: MokuPro
  * Heat & Soldering stations: [[https://www.jbctools.com/pdf/JTSE-A_MANUAL.pdf|JBC JTSE-A]] & [[https://www.jbctools.com/pdf/JTSE-A_MANUAL.pdf|JBC DME 4-tools]]
  * Reflow oven: [[https://www.eurocircuits.com/wp-content/uploads/EN-eC-Reflow-mate-V4-User-Manual-170915.pdf |eC-reflow-mate V4]]
  * [[Laser Microscope]]: Keyence VK-X3000